| 
| 
The Fly V3 from Elite is a wireless pen-style machine with a display on the front of the machine.
This machine is powered by a single Panasonic NCR 18500A 2040 mAh rechargable battery that will allow you to work for approximately 6 to 10 hours. A battery charger is included with the machine for charging the battery.
The machine has an LED display and buttons on the front of the machine. While working, you can see what voltage is selected and how long the remaining battery life.
The Fly V3 has a jump start function to give the machine extra power when turned on. Thanks to this function, the machine can be used with almost all brands of needle modules and sizes.
How does the machine work:
All functions are operated with the use of four buttons.
Turn the machine on or off by holding the power button for three seconds. The machine will or stop running when the power button is pressed again.
Press the + and - button simultaneously to switch on the jump start feature. The display will show a small lightning bolt when this feature is turned on.
The + and - buttons are used to change the voltage. The voltage of the machine can be adjusted from 4 to 12V in 0.1 volt increments.
With the Fly V3 you can save up to 4 voltage presets. To use this function press the preset button, select your desired voltage and save by pressing and holding the preset button for 3 seconds.
Included with the machine:
2 Panasonic NCR 18500A 2040 mAh Rechargeable Batteries.
1 Battery Charger with USB-A cable.
Technical Specifications:
Direct Drive
Operating voltage: 4 - 12V
Stroke: 4 mm
Dimensions (Ø X L): 33.5 mm x 125 mm
Grip size: 33.5 mm
Weight with battery: 210 grams